Toulouse (France) - Beton Master pumping concrete 2 levels underground (under the subway and an underground parking) in the central Place Esquirol at Toulouse.
Transmat 27.45 DCB is a mixing and pumping pneumatic machine for large volume of screeds, equipped with diesel engine, built-in compressor, and loading bucket.
Turbosol worm pump Poli T (model EVMP), sold by our dealer in Verona Edil CDP S.R.L. and used in a building site in Bolzano area for pumping a grout mixed with a 6 mm crashed aggregate.
In thi...
Turbosol POLI T EVMP working in a mortar structural demonstration. The machine is spraying mortar into formworks made of 3D panels and electro-welded steel mesh.
Turbosol Beton Master used for pumping the pool floor in a private house in France. Its small dimensions and great maneuverability make Beton Master the ideal solution, espe...
Turbosol Beton Master used by the company Bourdarios to pump concrete at Purpan Hospital in Toulouse.
To find out more: http://turbosol.it/public/ENG/BM%202017aprile-GB-HR.pdf
Turbosol Talent screw pump used for pressure pointing. Talent features an infinitely variable hydraulic delivery control, a lifting mixer and a combined pointing gun with air nozzle.
TB30 multipurpose stationary pump from Turbosol working on site in Morocco. Delivered last February to Maroc Trading, our sole agent in the country, TB30 has proudly granted the best performanc...
The hydraulic plastering machine with screw pump Turbosol T20X used at a construction site near Toulouse (F) for application of plaster based on lime and sand.
Poli T EVMP for securing the Town Hall of Norcia
At the end of November, new earthquakes further damaged the already compromised architectural heritage of many municipality in central It...
Poli T EV / MP Turbosol for the Aracati wind farm in Brazil
Poli T EV / MP Turbosol, worm type plastering machine for ready mixed plasters and common and special mortars has being used s...
TSR7 is a tracked unit for shotcrete applications ideal in underground works or difficult to reach areas. Equipped with a powerful crawler carrier, TSR 7 is the best solution to move in rugged an...
GIOTTO MONO is the ideal solution for dosing, mixing, pumping and spraying dry mixed materials.
In this video, the single-phase machine, is applying interior-use lime/cement plaster.
GIOTTO...
Our technician, Federico, has traveled to Dakar in order to provide on-site start-up support for a new building project in Senegal.
The training was focused on how to operate the machines as w...
Giotto is a three-phase plastering machine designed to apply cement-based, gypsum-based and insulating ready-mixed dry plasters.
Giotto offers maximum performance with minimum clearance.
...
BM 30 is a sturdy and compact concrete machine ideal for use in rigorous construction sites. It’s simply and easy to use and it can pump concrete up to 30 cubic meters per hour.
In these p...
Beton Master is a robust and high resistant concrete machine designed for heavy working conditions.
Here you can appreciate Beton Master spraying concrete at the Barrage des Gloriettes (1668 m...
Working in a very special jobsite with an excellent machine: our Beton Master pumping concrete in the Italian Antarctic Station “M. Zucchelli” during the XXX Antarctic Expedition (2014-1...
UNI 30 is the most powerful piston pump with ball valves available in the market. It is extremely strong and reliable ideal for civil and industrial works. The machine is able to pump up to 150 ...
Mini Avant G is the gasoline version of our Mini Avant piston pump ideal for spraying traditional mortars. Mini avant is able to pump more than 30.000 m2 mortar with one piston.
In this video Mini Avant is spraying a first layer of plaster on outside wall.
With one piston, Mini Avant is able to pump more than 30.000 m2 of plaster.
Mini Avant: side by side with yo...
T7 EVO is a versatile worm-gear pump ideal for spraying numerous finishing coatings. Here some picture of our T7 EVO, supported by a crane, spraying a waterproof coating in a road bridge at 35 me...
Transmat 27.45 is the ideal solution for mixing and conveying admixtures pure in cement or water. The machine can also pump any type of aggregates such as sand, gravel, cork, etc.
Transmat 27....
Transmat 250 is an electric three-phase screeding machine ideal for mixing, conveying and elevating traditional screeds and light insulations, mortars, concrete and aggregates.
Transmat 250 ...
PRO H CL is the ideal solution for pumping large volumes of self-levelling screeds.
The machine pumps liquid and semi-liquid admixtures with a maximum granulometry of 14÷16 mm (equipped wit...
Do you need to pump concrete with particle size up to 35 mm? The solution you are looking for is our BM 30 two cylinder pump!
BM 30 is the ideal solution for transporting and casting large ...
Beton Master is the ideal solution for pumping concrete in any jobsite.
In this video, Beton Master, equipped with a combination of steel pipes and rubber hoses, is pouring concrete insid...
T7 is a flexible machine ideal for applying a wide range of finishing coating. In this video T7, flanked by a separate Turbosol compressor, is spraying a waterproofing coating in an artificial ri...
Why do we have to use a big, powerful, heavy, unfriendly and expensive plastering equipment, when we can do exactly the same job with a small size, user friendly, ergonomic and inexpensive equipm...
Uni 30 is the ideal solution for mixing, transporting, spraying and injecting common or special cementitious admixture with granulometry up to 10 mm.
In this video, Uni 30 is fed by a cement m...
Mini Avant Vario is equipped with an electronic device for variable output that allows to modify the flow rate from 2 to 30 litres per minute, according to the type of materials to be pumped.
...
Talent is a plastering machine belonging to the segment of large machines for mixing, pumping and spraying common mortars, ready-mixed and fiber-reinforced plasters.
In this video, Talent is...