Transmat 27.45 DCB is a mixing and pumping pneumatic machine for large volume of screeds, equipped with diesel engine, built-in compressor, and loading bucket.
Poli T is a modular electric worm pump ideal for plaster and mortar jobs.
In this video, Poli T is equipped with a 60.12 pump in order to apply self-levelling screeds.
Poli T: the most ve...
Transmat 27.45 is the ideal solution for mixing and conveying admixtures pure in cement or water. The machine can also pump any type of aggregates such as sand, gravel, cork, etc.
Transmat 27....
Transmat 250 is an electric three-phase screeding machine ideal for mixing, conveying and elevating traditional screeds and light insulations, mortars, concrete and aggregates.
Transmat 250 ...
PRO H CL is the ideal solution for pumping large volumes of self-levelling screeds.
The machine pumps liquid and semi-liquid admixtures with a maximum granulometry of 14÷16 mm (equipped wit...
Manutention Toulousaine, French Turbosol dealer, took part to a 2-days training at Turbosol premises. The training focused on the operation and start-up of our Transmat 27.45 screed machine.
Talent is a plastering machine belonging to the segment of large machines for mixing, pumping and spraying common mortars, ready-mixed and fiber-reinforced plasters.
In this video, Talent is...
Thanks to the special construction, Beton Master can be used both for shotcrete and for pumping concrete.
In this video, Beton Master, equipped with Ø 50 rubber hoses, is pumping large volumes...
In this video you can appreciate a material slump test to check the workability of fresh material. After checking the correct consistency of the admixture, PRO H CL is able to pump up to 300 lite...
Transmat 27.45 is one of the top models in the range of machines designed for mixing and pumping screeds, isulating mixtures, concrete and aggregates.
In this video, Transmat 27.45 is mixing...
Transmat 250 EBP is the famous and widely used Turbosol machine for mixing, conveying and elevating screeds. This machine, equipped with loading bucket and scraping shovel, pumps the material di...
GIOTTO MONO is the ideal solution for dosing, mixing, pumping and spraying dry mixed materials.
In this video, the single-phase machine, is applying interior-use lime/cement plaster.
GIOTTO...
Giotto is a three-phase plastering machine designed to apply cement-based, gypsum-based and insulating ready-mixed dry plasters.
Giotto offers maximum performance with minimum clearance.
...
The famous single-cylinder Turbosol pump, Mini Avant, is the ideal solution for pumping, transporting and spraying common, ready-mixed and special mortars.
In this video, the MINI AVANT G vers...