TRANSMAT 27.45
Transmat 27.45 DCB is a mixing and pumping pneumatic machine for large volume of screeds, equipped with diesel engine, built-in compressor, and loading bucket.
PRO H CL working at Algiers
PRO H CL casting self-levelling screeds at Algiers.
Transmat 27.45 for mixing and pumping screeds
Transmat 27.45 is the ideal solution for mixing and conveying admixtures pure in cement or water. The machine can also pump any type of aggregates such as sand, gravel, cork, etc.
Transmat 27....
Transmat 250 for mixing, conveying and elevating screeds
Transmat 250 is an electric three-phase screeding machine ideal for mixing, conveying and elevating traditional screeds and light insulations, mortars, concrete and aggregates.
Transmat 250 ...
Screeds over underfloor heating with PRO H CL
PRO H CL is the ideal solution for pumping large volumes of self-levelling screeds.
The machine pumps liquid and semi-liquid admixtures with a maximum granulometry of 14÷16 mm (equipped wit...
Transmat 27.45 Training (February 23 & 24)
Manutention Toulousaine, French Turbosol dealer, took part to a 2-days training at Turbosol premises. The training focused on the operation and start-up of our Transmat 27.45 screed machine.
Self-levelling screeds with Talent
Talent is a plastering machine belonging to the segment of large machines for mixing, pumping and spraying common mortars, ready-mixed and fiber-reinforced plasters.
In this video, Talent is...
Self-levelling screeds with Beton Master
Thanks to the special construction, Beton Master can be used both for shotcrete and for pumping concrete.
In this video, Beton Master, equipped with Ø 50 rubber hoses, is pumping large volumes...
Slump test with PRO H CL
In this video you can appreciate a material slump test to check the workability of fresh material. After checking the correct consistency of the admixture, PRO H CL is able to pump up to 300 lite...
Traditional floor screed with Transmat 27.45
Transmat 27.45 is one of the top models in the range of machines designed for mixing and pumping screeds, isulating mixtures, concrete and aggregates.
In this video, Transmat 27.45 is mixing...
Transmat 250 EBP for screeding
Transmat 250 EBP is the famous and widely used Turbosol machine for mixing, conveying and elevating screeds. This machine, equipped with loading bucket and scraping shovel, pumps the material di...
Turbosol T7 EVO
Turbosol T7 EVO: compact and lightweight single-phase screw pump.
Turbosol TB30 a Bogotà
Turbosol TB30, stationary concrete pump with S-valve and variable output in Bogotà (Colombia).
TB 30 Electric version in Paris downtown
TB 30 electric version pumping concrete in a renovation job at Paris downtown.
TURBOSOL TB 50
Turbosol TB 50, variable displacement two cylinders pump with S-valve, employed for filling formworks inside the Chambon tunnel in France.
Turbosol Beton Master – skid version
Turbosol Beton Master – skid version, used by our customer Savoie for foundation in a working site in Tour Altaïs - Montreuil (France).
TB50 on construction site in Bobo-Dioulasso, Burkina Faso
TB 50 for the construction of CIMASSO cement factory in Bobo-Dioulasso.
GIOTTO MONO spraying dry mix materials
GIOTTO MONO is the ideal solution for dosing, mixing, pumping and spraying dry mixed materials.
In this video, the single-phase machine, is applying interior-use lime/cement plaster.
GIOTTO...
Giotto for ready-mixed dry plasters
Giotto is a three-phase plastering machine designed to apply cement-based, gypsum-based and insulating ready-mixed dry plasters.
Giotto offers maximum performance with minimum clearance.
...
Mini Avant G for traditional plasters
The famous single-cylinder Turbosol pump, Mini Avant, is the ideal solution for pumping, transporting and spraying common, ready-mixed and special mortars.
In this video, the MINI AVANT G vers...